CTRL+E after memory initialization during reboot. This allows you to reenable and reconfigure.

The following messages may appear during the boot process:

•Adapter removed from boot order, parameters will be updated accordingly! appears when an adapter is removed from the system or is relocated behind a PCI bridge. This message is for information only, and no further user action is required.

•Configuration data invalid, saving default configuration! appears if none of the information in nonvolatile random access memory (NVRAM) is valid. This message is for information only and can occur when the BIOS is upgraded or when some external event has rendered the NVRAM temporarily unreadable.

•Found FC Controller not in following Boot Order List, to Add: Press Ctrl-C to start LSI Logic Configuration Utility... appears when fewer than four adapters are in the boot order and adapters exist in the system that are not in the boot order. This message is for information only and indicates that more than four adapters exist in the system. The additional adapters are not managed by the CU.

4.7OpenBoot BIOS

LSI Logic Solaris-capable, Fusion-MPT host adapters have Fcode resident on board, allowing operation under the Sun Microsystems OpenBoot console. All basic functionality is available in an OpenBoot environment, including the ability to display devices connected to the adapter and to boot devices on the adapter.

4.7.1OpenBoot BIOS Features

The LSI Logic FC OpenBoot BIOS supports the following:

•Solaris SPARC 2.6, Solaris SPARC 2.7, and Solaris 8 Open Firmware environments

•Root Boot device selection from any target device

•Standard command line interface, with help query

•Configuration options and selection capability for each host adapter

OpenBoot BIOS

4-7

Copyright © 2002 - 2005 by LSI Logic Corporation. All rights reserved.