4.7.4.3show-children Command

While you have the host adapter or port selected, use the show-childrencommand to display the devices currently connected to this adapter.

First, select the port or adapter shown (use the port name your system assigns):

ok select /pci@8,700000/IntraServer,fc@1

ok show-children

MPT Version 1.00, Firmware Version 1.02.00

Link is ready, port is online

WWN 100000a0b8040353 Port ID ef

Target 0

Unit 0 Disk SEAGATE ST39173FC 6615

WWN 2100002037109d76 Port ID d9

Target 1

Unit 0 Disk SEAGATE ST39173FC 6258

WWN 210000203710565a Port ID 17

Target 2

Unit 0 Disk SEAGATE ST39173FC 6258

WWN 2100002037105212 Port ID 1

Target 3

Unit 0 Disk SEAGATE ST39173FC 6258

WWN 2100002037103da8 Port ID 26

Target 4

Unit 0 Disk SEAGATE ST39173FC 6258

WWN 210000203710324a Port ID 73

4-12

BIOS Features

Copyright © 2002 - 2005 by LSI Logic Corporation. All rights reserved.