4.7.2Identifying the FC Devices

The probe-scsi-allcommand identifies the FC devices on your Fusion- MPT adapter.

To show all disks available from the OpenBoot prompt, use the probe-scsi-allcommand. Note that this command is used regardless of whether the disks are FC or SCSI. All disks available on all Fusion-MPT devices are displayed.

The following example shows the kind of information that is displayed when you enter this command.

ok probe-scsi-all

/pci@8,600000/SUNW,qlc@4

LiD HA LUN

---Port WWN---

----Disk description----

1 1 0 2100002037e4d65b SEAGATE ST318304FSUN18G 0726

/pci@8,700000/IntraServer-Ultra160,scsi@3,1 /pci@8,700000/IntraServer-Ultra160,scsi@3

Target 0

 

Unit 0 Disk IBM

DDRS-34560D DC1B

/pci@8,700000/IntraServer,fc@2

MPT Version 1.00, Firmware Version 1.02.00

Target 0

Unit 0 Disk SEAGATE ST39173FC 6615

WWN 2100002037109d76 Port ID d9

Target 1

Unit 0 Disk SEAGATE ST39173FC 6258

WWN 210000203710565a Port ID 17

Target 2

Unit 0 Disk SEAGATE ST39173FC 6258

WWN 2100002037105212 Port ID 1

Target 3

Unit 0 Disk SEAGATE ST39173FC 6258

WWN 2100002037103da8 Port ID 26

4-8

BIOS Features

Copyright © 2002 - 2005 by LSI Logic Corporation. All rights reserved.