4.4.5Global Properties Menu

The Global Properties menu allows you to pause if an alert message has been displayed, to view display boot information, and to set display and video modes.

4.5Exiting the LSI Logic Boot BIOS Configuration Utility

The Exit menu for the LSI Logic boot BIOS configuration utility is used for all six of the menus listed in Section 4.4, “Main Menu,” page 4-.3However, the available functionality is different for the Main menu and the five subordinate menus.

To exit from the Adapter Properties, Persistent ID, Device Properties, Boot Adapter List, or Global Properties menus, use the following exit options:

Cancel exit

Returns you to the previous menu.

Save changes then

Implements any changes you made on the previous

exit this menu

menu and returns you to the Main menu.

Discard changes

Restores the default settings and returns you to the

then exit this menu

Main menu.

To exit from the Main menu, use the following exit options:

Cancel exit

Returns you to the Main menu.

Exit the Configuration

Exits the configuration and automatically reboots your

Utility

system.

Important: If you reboot the system without properly exiting from this utility, some changes may not take effect.

4.6Troubleshooting

The LSI Logic boot BIOS Configuration Utility is a powerful tool. If you disable all of your controllers while using it, pressing CTRL+A or

4-6

BIOS Features

Copyright © 2002 - 2005 by LSI Logic Corporation. All rights reserved.