Step 5. The MPTUtil program displays a menu of options (Figure 3.5).

To update the firmware, select optiona - Update Firmware.

Figure 3.5 MPTUtil Options

LSI Logic Corp. FC/SAS Serial EEPROM / FLASH Utility. LSIMPTUTIL 1.00.00

Copyright (c) 2005 LSI Logic Corporation. All rights reserved.

*******************************************************************

Currents

Port 0

Port 1

World Wide P/N...

0x100000062B092448

0x100000062B092449

World Wide P/N...

0x200000062B092448

0x200000062B092449

Topology.........

Auto

 

Speed............

Auto

 

Device Pathing...

All Paths to a device

 

Protocol Support.

INIT TARG LAN

 

Firmware: LSIFC929X 1.02.12 (2005.06.15)

********************************************************************

a - Update Firmware

b - Update BIOS & Firmware

c - Upload current firmware to a file d - Upload current BIOS to a file

f - Toggle Board Speed on Function 0 g - Toggle Board Speed on Finction 1 f - Toggle Topologies on Function 0 g - Toggle Topologies on Finction 1

l - Change Interrupt Coalescing Values on Port 0 m - Change Interrupt Coalescing Values on Port 1

x - Erase BIOS

y - Change Protocol Support

z - Change Adapters

q - Quit

Selection:

Step 6. When prompted, type the filename of the BIOS/Fcode update. The update process commences and completes in about 20– 30 seconds.

Step 7. Exit the MPTUtil utility using the menu option q - Quit.

3.4Advanced User: Adjusting Default Firmware Settings

Occasionally, a user may find it necessary to adjust default firmware parameters set by LSI Logic during the original manufacturing process. Adjustments to these parameters will affect future behavior of the

3-8

Firmware Installation Procedure

Copyright © 2002 - 2005 by LSI Logic Corporation. All rights reserved.