User Interface and Basic Operation
2-2 9124-A2-LB20-00
March 2000
Logging On
Start a session using one of the following methods:
HTelnet session via:
—An in-band management channel through the frame relay network.
—A local in-band management channel configured on the DTE port
between the FrameSaver unit and the router.
HDial-in connection using the internal modem.
HDirect terminal connection over the COM port.
When logging on, the User Interface Idle screen appears.
HIf no security was set up or security was disabled, the Main Menu screen
appears (see page 2-4). You can begin your session.
HIf security was set up and is enabled, you are prompted for a login. Enter
your login ID and password.
When the user interface has been idle, a session is automatically ended and the
screen goes blank when the unit times out. Press Enter to reactivate the
interface.
"Procedure
To log in when security is being enforced:
1. Type your assigned Login ID and press Enter.
2. Type your Password and press Enter.
—Valid characters – All printable ASCII characters
—Number of characters – Up to 10 characters can be entered in the
Login ID and Password fields
—Case-sensitive – Yes
An asterisk (* ) appears in the password field for each character entered.