SNMP MIBs and Traps, and RMON Alarm Defaults

B-7

9124-A2-LB20-00 March 2000
Trap: warmStart
This trap indicates that the FrameSaver unit has been reset and has stabilized.
Table B-3. warmStart Trap
Trap What It Indicates Possible Cause
warmStart FrameSaver unit has just
reinitialized and stabilized
itself.
HReset command sent.
HPower disruption.
St i
Variable-Binding String:
‘Unit reset.’
devLastTrapString
(devHealthAndStatus.mib)
Trap: authenticationFailure
This trap indicates that access to the FrameSaver unit was unsuccessful due to
lack of authentication.
Table B-4. authenticationFailure Trap
Trap What It Indicates Possible Cause
authenticationFailure Access to the FrameSaver
unit was attempted and
failed.
HSNMP protocol message not
properly authenticated.
HThree unsuccessful attempts
were made to enter a correct
login user ID/password
combination.
HIP Address security is enabled
and a message was received
from the SNMP Manager
whose address was not on the
lost of approved managers.
String:
‘Unauthorized access attempted.’
Variable-Binding
devLastTrapString
(devHealthAndStatus.mib)