5.Enter the new password following the same steps previously described and as shown in Figure 14.
6.Confirm the password by reentering it. You will receive a password confirmation screen. Please record the new password and keep it in a safe place.
7.To disable the password follow steps 1 – 3, but select the Disable Password button as shown in Figure 17. The password is now disabled.
After 30 seconds of inactivity, the room station returns to the Greeting Menu as shown in Figure 2.
Establish Intercom Settings
Pressing the Intercom key produces the same Microphone Volume and Acoustic Delay menu seen in the Door Station option. This allows you to set the volume control and microphone sensitivity for the intercom.
1.To adjust the intercom settings press the Main Menu button from the greeting menu shown in Figure 2.
2.Press the More button on the Main Menu shown in Figure 3.
3.Press the Setup button on the More Menu shown in Figure 4.
4.Press the Intercom button on the Setup Menu shown in Figure 5.
5.You will see Intercom adjustment screen shown in Figure 18.
6.Use the arrows to adjust the intercom settings.
Use the top set of up and down arrows to set the microphone volume
Cancel the settings
Use the bottom set of up and down arrows to
set the acoustic decay
Store the settings in the system
Figure 18 - Intercom Settings Adjustment Screen
| 2861 Congressman Lane Dallas, Texas 75220 800.877.6631 www.mssystems.com |
| Page 19 |
|
|
|
| ||
|
|
|
|
|
