Wake Menu
The wake feature allows you to program the MC2000 room station to begin playing music at a specific time, much like an alarm clock, or clock radio. You can store up to five events, or wake times. The wake function works only with the AM or FM source. To select the Wake Menu see Figure 20.
Toggle between the wake events - up to 5 events
Change the Wake Event
Source.
Volume setting
Cancel the changes or Store the wake settings.
Figure 26 - Wake Menu
Enables or disables the wake event currently showing.
Sets the time of the event.
Snooze setting duration
Return to the Main Menu.
•Event: The currently selected wake event. The MC2000 allows you to preset up to 5 unique wake events per room on the system.
•Advance the Wake Event Source: It advances in this sequence: FM1, FM2, FM3 (etc.), AM1, AM2, AM3 (etc.), Then back to FM1.
•Volume control. It is set at 06 for the lowest, and 34 for the highest. To change the volume, press the button until it reads the desired volume.
•Cancel: Cancels all the changes and they will not be saved on the system.
•Enabled/Disabled: A toggle activating or deactivating the current event. If the room station displays “Enabled” the wake even is scheduled. If the display says, “Disabled” the wake event is not scheduled.
•Time setting: Press to access the time set menu. Use the up and down arrow keys to set the hour and minute. Be sure and press Set to save the time in the system.
•Snooze – This feature allows you to establish a preset snooze time of an additional 5, 10 or 15 minutes. After the wake event is triggered, you can hit snooze for the preset snooze time. The music will go off until the desired number of minutes has passed then the music will start playing again.
| 2861 Congressman Lane Dallas, Texas 75220 800.877.6631 www.mssystems.com |
| Page 29 |
|
|
|
| ||
|
|
|
|
|
