M A G M A
Although you were not prompted to do so, you must restart your computer in order for your computer to see the PCI slots in the expansion system.
Go to: ·Start Shut Down Choose ‘Restart’ from the drop down menu click OK.
After restarting, your computer should automatically find the next PCI bridge device. It may not be obvious to you that your computer found any new hardware, but you can verify that the expansion system is installed correctly by checking that there are no exclamation mark (bangs) in the Device Manager under the PCI Bus that the expansion system is installed on.
Your device manager should now look similar to the following:
14 | Chapter 2 Installation Guide |
