Error Messages

Reports!

If your unit cannot send a fax, check the following:

the number you dialled is correct,

the other party’s machine is a facsimile.

If the problem remains, correct it by following the communication message printed on the sending and journal reports (p. 31).

COMMUNICATION ERROR (CODE: 40–42, 46–72, FF)

A transmission or reception error occurred. Try again or check with the other party.

COMMUNICATION ERROR

(CODE: 43, 44)

A line problem occurred. Connect the telephone line cord to a different jack and try again.

An overseas transmission error occurred. Try using the overseas mode of feature #23 (p. 64).

DOCUMENT JAMMED

The document is jammed. Remove the jammed document (p. 80).

ERROR-NOT YOUR UNIT (CODE: 54, 59, 70)

A transmission or reception error occurred because of a problem with the other party’s fax machine. Check with the other party.

MEMORY FULL

The document was not received due to memory being full.

NO DOCUMENT

The document was not fed into the unit properly. Reinsert the document and try again.

OTHER FAX NOT RESPOND

The other party’s fax machine is busy or has run out of recording paper. Try again.

The document was not fed properly. Reinsert the document and try again.

The other party’s fax machine rings too many times. Send the fax manually (p. 30).

The other party’s machine is not a facsimile. Check with the other party.

The number you dialled is not in service.

PRESSED THE STOP KEY

{was pressed and fax communication was cancelled.

OK

Fax communication was successful.

72

Page 72
Image 72
Panasonic KX-FP151AL, KX-FP155AL manual Error Messages, Reports