Setup

Metal bar!

The recording paper will be ejected from the top of the unit after printing. The metal bar prevents the printed paper from curling. Do not remove the metal bar.

If the bar comes off, attach it into the slots on the recording paper exit.

Metal bar

Printed paper

Connections!

Slots

Connect the handset cord, and the telephone line cord, then the power cord.

Connect to

This model is designed to be

“LINE”.

used in Australia and New

 

Zealand. TO USE IN NEW

ZEALAND, CHANGE THE

LOCATION SETTING (feature

#74 on page 70).

Power cord

To the power outlet (220 V–240 V, 50/60 Hz)

To the single

telephone line jack (For Australian users) Telephone

line cord

(For New Zealand users)

Caution:

Handset cord

When you operate this product, the power outlet should be near the product and easily accessible.

Be sure to use the telephone line cord included in this unit.

Do not extend the telephone line cord.

Note:

If you want to connect an answering machine to this unit, see page 42 (KX-FP151 only).

To use the fax machine with a computer on the same line

We recommend you use separate wall jacks for the fax machine and the computer.

Set the fax machine to TEL mode (p. 38).

The device which has the shortest ring setting will answer the call first.

If the computer provides a port for a telephone line, connect the fax machine to this port on the computer.

16

Page 16
Image 16
Panasonic KX-FP151AL, KX-FP155AL manual Metal bar, Connections, To use the fax machine with a computer on the same line