Setup
Paper tray!
Insert tabs on the paper tray into slits on the back of the unit.
Tabs
Slits
Note:
● Do not place the unit in areas where the paper tray may be obstructed (i.e. by a wall, etc.).
Paper tray
Tabs
Slits
Recording paper!
See the note for paper specifications on page 84.
1 | Fan the stack of paper to prevent a paper |
jam. |
2 Pull the tension plate forward and hold open while inserting the paper.
●The paper should not be over the tab.
●If the paper is not inserted correctly, readjust the paper, or the paper may jam.
Correct |
| Incorrect |
Stack of paper
Side to be printed face down.
Tension plate
To add paper
Tab
Tension plate
1. Pull the tension plate forward and hold open while removing all of the installed paper.
2. Add paper to the stack of paper you removed and straighten.
3. Fan the stack of paper.
4. Pull the tension plate forward and hold open while inserting the paper.
15