Error Messages

Display!

If the unit detects a problem, one or more of the following messages will appear on the display.

 

Display message

Cause & solution

 

 

 

 

 

There is something wrong with the unit. Contact our service

 

CALL SERVICE

 

 

personnel.

 

 

 

 

CALL SERVICE2

 

 

 

 

 

 

 

 

 

The document was not fed into the unit properly. Reinsert the

 

CHECK DOCUMENT

 

 

document. If misfeeding occurs frequently, clean the document

 

 

feeder rollers (p. 81) and try again.

 

 

 

 

 

The memory (telephone numbers, parameters, etc.) has been

 

CHECK MEMORY

 

 

erased. Re-program.

 

 

 

 

 

The recording paper is not installed or the unit has run out of

 

CHECK PAPER

 

 

paper. Install paper and press wto clear the message.

The recording paper is not fed into the unit properly. Reinstall paper (p. 15) and press wto clear the message.

The recording paper has jammed near the recording paper entrance. Clear the jammed paper (p. 79) and press wto clear the message. Do not install folded or heavily curled paper.

 

COVER

OPEN

The covers are open. Close them.

 

 

 

The ink film is empty. Replace the ink film with a new one (p. 13).

 

 

 

The ink film is not installed. Install it (p. 13).

 

 

 

 

CHECK

FILM

The ink film is slack. Tighten it (see step 7 on page 14).

 

 

 

 

 

 

 

 

 

 

 

There is no space to store new entries in the directory. Erase

 

DIRECTORY FULL

 

 

 

unnecessary entries (p. 23).

 

 

 

 

 

 

 

The unit has a document in memory. See the other displayed

 

FAX IN MEMORY

 

 

 

message instructions to print out the document.

 

 

 

 

 

 

 

The memory is full of received documents due to a lack of

 

FAX MEMORY FULL

 

 

 

recording paper or a recording paper jam. Install paper or clear

 

 

 

the jammed paper.

When performing memory transmission, the document being stored exceeds the memory capacity of the unit. Transmit the entire document manually.

MEMORY FULL

When making a copy, the document being stored exceeds the

 

memory capacity of the unit. Press {to clear the message.

 

Divide the document into sections.

73

Page 73
Image 73
Panasonic KX-FP155AL, KX-FP151AL manual Display message Cause & solution