Remote Operation (KX-FP155 only)
Operating from a remote location!
The following operations can be performed from a remote location using a touch tone telephone.
Program the remote operation ID (feature #11 on page 63) and set the unit to TAD/FAX mode before going out (p. 49).
Dial key | Remote command | Page |
|
|
|
0 | Skips the greeting message | 55 |
|
|
|
1 | Repeats a message | 54 |
|
|
|
2 | Skips a message | 54 |
|
|
|
4 | New message playback | 54 |
|
|
|
5 | All message playback | 54 |
|
|
|
6 | Room monitor | 55 |
|
|
|
7 | 55 | |
|
|
|
9 | Stops | 55 |
| message |
|
|
|
|
Dial key | Remote command | Page |
|
|
|
*4 | Erases a specific message | 55 |
|
|
|
*5 | Erases all messages | 55 |
|
|
|
80 | Changes to TEL mode | 55 |
|
|
|
81 | Turns ON message transfer | 55 |
|
|
|
82 | Turns OFF message transfer | 55 |
|
|
|
83 | Turns ON pager call | 55 |
|
|
|
84 | Turns OFF pager call | 55 |
|
|
|
Remote operation card
Please cut out and carry this card for assistance when using the remote operation.
Mailbox Remote Operation
Notice of Remote Operation
■Recording a message in a mailbox:
1.Call your unit.
2.Press *and the mailbox no. (1or 2).
3.Leave a message.
■Retrieving messages from a mailbox:
1.Call your unit.
2.Press *and the mailbox no. (1or 2).
3.Enter the mailbox
password .
4.Press the remote command key (see the reverse side).
●81, 82, 83and
84cannot be used.
Fold here
●The remote operation is available only from a touch tone telephone when the unit is in TAD/FAX mode.
●When the unit is in TEL mode, call your unit and wait for 10 rings. Enter the remote operation ID within 8 seconds and wait for 3 seconds.
The unit will switch to TAD/FAX mode.
●When you press a key, press firmly.
●To send a document, press *9. When a fax tone is heard, start transmission.
53