Setup
Ink film – installing / replacing!
Install the included ink film or replace the used ink film with new one. Model No.
Model No.
Each roll prints about 140
1 | Open the front cover by pulling up the centre |
part. |
2 Push the back cover open button (green) on the right side of the unit.
OR
Push the back cover open lever (green) inside of the unit.
Centre part
Front cover
Back cover open button (green)
OR
Back cover
open lever (green)
3 | Open the back cover. | Back cover | |
● | For first time installation of the supplied ink | ||
|
| film, skip to step 6. |
|
4 | For replacement only |
Pull out the blue gear and remove the used |
ink film. Remove the used core.
(continued)
Blue gear
Used core
Used ink film
13