Magnavox CT270MW8 A owner manual 5Auto Channel Scan, 5Channel Add/Delete

INITIAL SETTING

5Auto Channel Scan

If you switch wires (e.g., between antenna and CATV) or if you move the unit to a different area after the initial setting, or if you recover the DTV channel you deleted, you will need to perform auto channel scan.

Before you begin:

Make sure if the unit is connected to antenna or cable.

1Press [SET-UP]to display the main menu.

2Use [Cursor K/L] to select “CHANNEL SETUP”, then press [ENTER].

e.g.) digital TV mode

•Channel setting will be saved even if the power fails.

•If you have Spanish or French menus and need English, press [SET-UP]. Use [Cursor K/L] to select “IDIOMA” or “LANGAGE”. Press [ENTER] to select “ENGLISH”. Press [SET-UP]to remove the main menu.

•With regard only to the digital channel, even after the scan- ning is complete if you unplug the AC power cord before turning off the unit by pressing [STANDBY-ONy], the channel setting may be lost.

5Channel Add/Delete

The channel add/delete function lets you add the channel that was not added by the auto channel scan due to the reception status at the initial setting. You can also delete the unnecessary channels.

or

– TV/VCR SETUP –

1 Follow steps 1 to 2 in “Auto Channel Scan“ on the left

TIMER PROGRAMMING

SETTING CLOCK

B CHANNEL SETUP

USER'S SETUP

V-CHIP SETUP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

DTV SETUP

3Use [Cursor K/L] to select your desired preset type, then press [ENTER].

e.g.) digital TV mode

or	--- CHANNEL SETUP ---
	ADD/DELETE (DTV)
	AUTO PRESET CH (DTV)
	AUTO PRESET CH (TV/DTV)
	AUTO PRESET CH (CATV)
	! CATV takes approx. 50min.

•When aerial antenna is connected, select “AUTO PRESET CH (TV)”, “AUTO PRESET CH (DTV)” or “AUTO PRESET CH (TV/DTV)”.

•When connected to CATV, select “AUTO PRESET CH (CATV)”.

•Scanning and memorizing the channels automatically start.

e.g.) digital TV mode

D25

AUTO PRESET CH(DTV)

•When the scanning and memorizing are completed, the lowest memorized channel will be displayed.

•When you selected “AUTO PRESET CH (TV/DTV)”, the lowest memorized analog channel will be displayed when the scanning and memorizing are completed. If there is no analog channel, the lowest memorized digital channel will be displayed.

Note:

•If you connect the cable system directly, contact the CATV installer.

•If you press [STANDBY-ONy]or [SET-UP]during “AUTO PRESET CH”, the setting will be canceled.

•When no channel can be received by “AUTO PRESET CH”, “NO TV SIGNALS” is displayed on the TV screen.

14

column.

2Use [Cursor K/L] to select “ADD/DELETE(DTV)” or “ADD/DELETE”, then press [ENTER].

e.g.) digital TV mode

or	--- CHANNEL SETUP ---
	ADD/DELETE (DTV)
	AUTO PRESET CH (DTV)
	AUTO PRESET CH (TV/DTV)
	AUTO PRESET CH (CATV)
	! CATV takes approx. 50min.

3Select the channel you want to add or delete. (Refer to “Channel Selection“ on page 15.)

e.g.) digital TV mode

D25

ADD/DELETE : DTV

4Use [Cursor s / B] to select “ADD” or “DELETE”.

• To add or delete another channels, repeat steps 3-4.

or

•Color of channel number displayed at the right top of the TV screen indicates;

-Blue: The selected channel will be added.

-Red: The selected channel will be deleted.

5Press [SET-UP]to exit.

Note:

•In the digital mode (DTV), you can add or delete channels only for major channel.

•Once you delete a DTV channel, you cannot recover the channel without performing auto channel scan again. (Refer to “Auto Channel Scan” on page 14.)

EN