Magnavox CT270MW8 A owner manual Black Level Setting, Stereo Sound Mode, Virtual Surround

Black Level Setting

DVD

Adjust the black level to make the dark areas of the TV picture brighter.

1During playback, press [MODE] repeatedly until ““ appears.

2Use [Cursor K/ L] to adjust the black level.

or OFF (BLACK LEVEL)

ON : Makes the dark areas brighter.

OFF : Shows the original picture as recorded.

3Press [RETURN] to exit.

Note:

• The setting will be kept even if the unit is turned off.

Stereo Sound Mode

CD

This unit allows you to select a sound mode during audio CD playback.

1During playback, press [MODE] repeatedly until “” appears.

2Use [Cursor K/ L] repeatedly until the desired sound mode appears.

or STEREO(AUDIO)

•Each time you press [Cursor K/ L], the sound mode changes as example below.

STEREO (stereo sound with left and right channels)

L-ch(left channel sound only)

R-ch(right channel sound only)

Note:

•Virtual surround cannot be changed when the sound mode is set to either “L-ch” or “R-ch”.

			Virtual Surround		INTRODUCTION
					PREPARATION
You can enjoy virtual surround on your existing 2 channel stereo system.
1 During playback, press [MODE] repeatedly until
“			“ appears.		INITIAL
					SETTING
2 Use [Cursor K/ L] to select the sound level.
			or
				1 (SURROUND)	WATCHING
1
			: Natural effect
2			: Emphasized effect		TV
OFF : No effects (original sound)
					OPERATING
3 Press [RETURN] to exit.
Note:					VCR
	• The setting will be kept even if the unit is turned off.
	• For audio CD, virtual surround will not be effective if the				OPERATING
		sound mode is set to something other than “STEREO”.
		See “Stereo Sound Mode”.
	• Turn down the level or select “OFF” if the sound is distorted.
					DVD
					DVD
					SETTING
					TROUBLESHOOTING
					INFORMATION
					ESPAÑOL

39

EN