OPERATING DVD

Marker Setup

This feature allows you to assign a specifi c point on a disc to be called back later.

To set a marker

1During playback, press [MODE] repeatedly until “ / ” appears.

e.g.) DVD

/12 (SEARCH)

2Use [Cursor K/L] repeatedly until maker search menu appears.

e.g.) DVD

or

3Use [Cursor s / B] to select an available marker within 60 seconds.

e.g.) DVD

or

4When the playback reaches the point at which you want to set a marker, press [ENTER].

• Marker is now set.

e.g.) DVD

To return to the marker later

1To select a desired marker, repeat steps 1-3 in “To set a marker“ above.

e.g.) DVD

2Press [ENTER] at the desired marker to start playback from the specific point which you set.

e.g.) DVD

Note:

Maker search menu will disappear in about 60 seconds when there is no input.

You can mark up to 10 points.

To clear a marker, select the marker to be cleared, and then press [CLEAR].

Ejecting the disc or turning off the power will erase all mark- ers.

Selecting “” at step 3 in the section “To set a marker” will also erase all markers.

5Press [RETURN] to exit.

40

EN

Page 40
Image 40
Magnavox CT270MW8 A owner manual Marker Setup, During playback, press Mode repeatedly until / appears DVD