2.Timer Review (Erasure & Correction)
2-1.Erasure
(1)Press the [SETUP] button to call the SETUP menu in TV state or press the [PROGRAM] button.
Press the [ 
/ 
] buttons to select the line of “Record Timer” and press the [ENTER] button to confi rm that.
(2)At that time, the VCR will check whether there are some errors or not:
•If the clock has not been set, then it will change to “Clock Set” screen automatically.
•If the PRs have not been set, then it will change to “Installation” screen automatically.
If there is no error, (2) screen appears.
Press the [ 
/ 
] buttons to select a erasing timer program.
The [ENTER] button is pressed to confi rm that, the stored contents of the selected Timer program are displayed.
(3) The [CLEAR] button is pressed to erase.
2-2.Correction
(1)Press the [SETUP] button to call the SETUP menu in TV state or press the [PROGRAM] button.
Press the [ 
/ 
] buttons to select the line of “Record Timer” and press the [ENTER] button to confi rm that.
(2)At that time, the VCR will check whether there are some errors or not:
•If the clock has not been set, it will change to “Clock Set” screen automatically.
•If the PRs have not been set, it will change to “Installation” screen automatically.
•If there is no error, (2) screen appears.
Press the [ 
/ 
] buttons to select a correcting record timer program.
The [ENTER] button is pressed to confi rm that, the stored contents of selected Record Timer program are displayed on the TV screen.
(3)The [ 
/ 
] buttons are pressed to correct the record timer program, the OSD screen will be changed to the screen of (3).
(4)How to correct: See the NEW PROGRAMMING procedures. The next steps are same as the steps of New Programming.
(5)To correct the other record timer programs, repeat the procedure from the step (1) to step (4).
20
