36

What Is Dew Condensation Symptom?

If a VCR is moved from a cool place to a warm
and damp place or a place facing a direct cool
wind from air-conditioner...and others,
temperature varies sharply, which makes dew on
head drums of VCR.

If Dew Condensation Occurs,

before using it.
2. Do not use it because it may develop
troubles of a VCR or videotape.
DVD Player Operation

Basic Operation

1. Press “VCR/DVD” button on the unit or press
the VCR/DVD button on the remote handset
to turn on DVD.
2. Press “OPEN / CLOSE” button to load disc in
disc tray.
3. Press “OPEN / CLOSE” button to close the
tray.
Hold the disc without touching either of its
surfaces, position it with the printed title
side facing up.
Play Discs
1. Press the OPEN / CLOSE Button on the front
panel and load the Disc on the tray.
The label side should be facing upwards. For a
Double-sided DVD Disc, put the disc with
label A/1 up.
2. Press the OPEN/CLOSE button again to close
the tray and the disc will be loaded.
3. The Disc will be played automatically.
If it is a DVD disc, it will show the Menu/
Title Page on the screen.
If it is a CD, it will play the fi rst track
directly.
4. Press the STOP Button if you want to stop the
Disc playback You can resume playback by
pressing the PLAY button and it will start at
the location where you have pressed stopped
(Resume Play).
5. Press the STOP Button twice to have the Disc
really stopped.
|| (PAUSE) / STEP
This function is applicable for DVD and CD audio.
For DVD, the picture will become static.
For CD audio, it will become silent.
1. Press the ( || ) Button will cause the player to
enter PAUSE/STEP mode.
2. Press the PLAY Button again will resume to
Play State.
DVD Setup Mode
Setup Mode provides the menu for the
confi guration of TV DISPLAY Mode, OSD
LANGUAGE mode, DOLBY Mode, AUDIO
Mode, PARENTAL Mode, PASSWORD,etc.
Item selection in the SETUP menu is done by
using the Direction button and the ENTER
button.
To exit the SETUP Mode to press the SETUP
button again.
The initial password for PARENTAL Mode is
set at 1379.

Note: To setup the TV display mode must

be in stop mode.