4.VISS (VHS Index Search System) Remarks : Subtitle after the point 4 diagrams.
(1)Under the following conditions, VISS can be executed.
•Power On
•Cassette In
•Except for recording mode
•Except for performing a Timer Programming
•Except for channel setting
(2)The index marks are automatically recorded on the tape at the recording start time. It is impossible to record and erase the index marks at any time.
(3)Press the
After 5 seconds it will wind (fast forward OR rewind) again until it reaches the next index mark.
If press the [PLAY] button during the temporary playback(within 5 seconds), the VCR will go to normal playback mode.
Press the [STOP] button to stop the VISS operation.
(4)During the operation of VISS, the mode displayed contents are as follow:
REW | SP | PLAY | SP | REW | SP | PLAY | SP |
INDEX |
|
| INDEX |
|
| ||
|
|
|
|
| |||
|
|
|
| ||||
|
|
|
|
|
| ||
FF | SP | PLAY | SP | FF | SP | PLAY | SP |
INDEX | 01 |
|
| INDEX | 02 |
|
|
|
|
|
|
| |||
0:00:30 |
| 0:00:45 |
| 0:00:55 |
| 0:01:30 |
|
|
|
|
|
|
| ||
Remarks:
•If two recordings overlap, the index mark for the second program will be erased. Therefore, when you use the index feature to fi nd the second program, the VCR will skip over it.
•If you record multiple programs in one recording session, the VCR will only fi nd the index mark that was placed on the video cassette tape when the recording session began.
Some index marks that may be missed by the VCR:
•A mark too close to your location on the tape.
•The mark of the beginning of a recorded segment of the minutes or less.
•The fi rst index mark on the tape when you start at the beginning of the tape.
29
