Magnavox MDVDVCR5 manual Auto Setting, Option

Auto Setting

(Only on the fi rst time setup off the factory)

Option 1

Connecting your TV thru Antenna and RCA cable (Recommended setup) (please make sure that you connected your TV and VCR properly)

Select your TV to AV mode

Tuning the VCR on

(1)Press Standby/On on the remote control. You can also press on the front panel.

(2)Set the VCR/DVD to VCR mode by the remote control or front panel button.

(3)VCR indicator light will be on in the panel.

Option 2

Connecting your TV thru Antenna

Turn on the TV

Turn the TV channel whichever channel you select when connecting thr VCR

(1)Press Standby/On on the remote control.You can also press on the front panel.

(2)Set the VCR/DVD to VCR mode by the remote control or front panel button.

(3)VCR indicator light will be on in the panel.

(4)Tune your TV to fi nd the VCR channel, please refer to the section of “TEST SIGNAL GENERATION MODE” on page 22.

Option 3

Connecting your player through extra equipment (satellite system)

Select your TV to AV mode

Tuning the VCR on

(1)Press Standby/On the remote control.You can also press on the front panel

(2)Set the VCR/DVD to VCR mode by the remote control or front panel button

(3)VCR indicator light will be on in the panel

1.Press the [ / ] buttons to select the desired country on the setup manu. And press the [ENTER] button to confi rm the selected country. Then VCR will auto-search and setup all your channels automatically.

2.After the channel auto searching is

completed the “Please wait” screen will appear a while.

3.The auto searching is completed, the screen is change to “CLOCK SET”. In case of setting the clock newly, press the [0-9] buttons as the following order:

hour -> minute -> day -> month -> year.

At that time, “--/--/----”, this clock input guide will appear on the TV screen.

•In case of correcting it, current date is

displayed on the TV screen, then press the [ / ] buttons to move the current to the wanted position and input the new numbers.

•The clock will work, although the VCR is in the clock setting state.

•In the “year” display, press “04” will change to 2004. Likewise, press “99” will change to 2099.

4.The [ENTER] button is pressed to confi rm the new clock. Press the [SETUP] button to leave the SETUP menu screen.

NOTE: This AUTO SETTING situation happens only on the first time setup off the factory. Should reset of clock or TV stations is needed, please reter to page 15 “MANUAL CLOCK SET” or page 22

“INSTALLATION”

COUNTRY

Australia

Newzealand

ENTER: Confirm SETUP: End

CLOCK SET

Time --:--

Date -- / -- / - - - -

SETUP: End

14