17
Record Timer

1. Recording Programming

1-1.MENU OPERATIONS
(1) Press the [SETUP] button to call the Setup
Menu in TV state.
Press the [
/
“Record Timer” and press the [ENTER] button to
confi rm that.
(2) At that time, the VCR will check whether there
are some errors or not:
If the clock has not been set, then it will
change to “Clock Set” screen automatically.
If the PRs have not been set, then
it will change to “Installation” screen
automatically.
If there is no error, (2) screen appears.
Press the [
/
] buttons to select the empty
(not occupied) record timer program.
Press the [ENTER] button to confi rm that.
(3) Press the [
/
] buttons to select the type
of the wanted timer recording.
(4) The [ENTER] button is pressed to confi rm that,
the data input screen for the new timer
programming will appear.
ONCE (In the case of selecting the type to
“Once”)
(5) Press the [0-9] buttons to set a PR number
or press the [
/
] buttons to select an
external (AV). “PRs”: To choice the recording
signals from the own tuner, which is built-in
VCR to tune and detect broadcasting signals.
(6) Press the [0-9] buttons in the following order:
start time -> end time -> start date.
In initial state, the start date will be displayed a
current date automatically.
Also, if the day or the month is changed at the
start date, the day of the week will be changed too
automatically, changed after inputting the day.
DAILY(MON-FRI) [In the case of selecting the
type to “DAILY(MON-FRI)”]
All the procedures of daily (Mon-Fri) recording are
the same as “once timer recording”.
DAILY(MON-SAT) [In the case of selecting the
type to “DAILY(MON-SAT)”]
All the procedures of daily (Mon-Sat) recording
are the same as “once timer recording”.
DAILY(MON-SUN) [In the case of selecting the
type to “DAILY(MON-SUN)”]
All the procedures of daily (Mon-Sun) recording
are the same as “once timer recording”.
WEEKLY [In the case of selecting the type to
“WEEKLY”]
All the procedures of daily (once a week)
recording
are the same as once timer recording.
Press the [
/
] buttons to select the tape
speed and press the [
speed and press the [
/
] button to input the
next data.
Press the [ENTER] button at the screen to confi rm
that.
If the program overlaps with another one, which
had already been programmed, the Error
message will appear for 3 seconds and it will
change to the screen for the “TIMER REVIEW”
automatically.
If the program does not overlap, the Guide
Message will appear for 3 seconds.