Madrigal Imaging MP-8, MP-9 manual Specifications

Section 5

Specifications

5.1 Specifications

Optics ➤

MP-8 and MP-9

Note: Due to constant research, specifications are subject to change without notice.

❑High definition hybrid lens

❑Optical resolution of 10 line pairs per mm

❑8"(MP-8) and 9"(MP-9) electromagnetic focus CRTs

❑Scheimpflug adjustment for top, bottom, and side-to-side focus

❑Liquid coupling for optimized contrast ratio (MP-9 only)

Resolution	➤	❑	2500 x 2000 addressability
		❑	1500 x 1200 ANSI pixels for MP-9, 1350 x 1100 for MP-8
Brightness	➤	❑	Usable light output per industry standard:
			160 ANSI lumens for MP-9, 200 ANSI lumens for MP-8
Display	➤	❑	Electronic geometry circuits separately correct top, bottom and sides
			for flat, curved or rear screens up to 25 feet diagonal
		❑	Keystone circuitry to correct pictures for angles greater than ±15°
			vertically from screen axis (dependent on throw distance)
		❑	Color temperature adjustment for precise setup
		❑	S and C vertical and horizontal linearity
		❑	Adjustable top, bottom and side blanking
		❑	9 zone electronic astigmatism correction (service adjustment)

Input Signals ➤ ❑ RGB Video Input Level: 0.5 to 1.0 volts p-p, 75 Ω ±1% terminated

❑Automatically switches to separate sync, composite sync, or sync on green

❑Separate or composite syncs are automatically accepted in either polarity

❑1.0 volts nominal audio input level

❑Sync on green: max horizontal frequency is 130 kHz

❑Sync input level: 0.3 to 5.0 volts p-p, 75 Ω ±1% terminated

5.1