INSTALLATION & SETUP
Step 10 ➤ Adjust C linearity as follows:
Press 
or 
until the horizontal line through the center of the crosshatch is equally distant from the lines at the very top and bottom.
BeforeAfter
Press 
or 
until the center of the crosshatch is equally distant from the vertical lines at the left and right edges.
Step 11 ➤ Adjust S linearity as follows:
Press 
or 
until the height of each crosshatch square is equal from the top to the bottom.
BeforeAfter
Press 
or 
until the width of each crosshatch square is equal from the left to the right.
The source connected to the currently selected input should now be visible. If there is no picture, check to see if the source is active.
Step 12 ➤ Press 
, 
, 
or 
to adjust phase until the picture is centered on the screen.
|
| Before | After | ||
Step 13 ➤ | Press , , or to adjust the size of the picture. Ensure that objects in | ||||
| your picture have the correct shape. For example, if there is a circle in your | ||||
| picture, size should be adjusted until the circle is round, not oval. | ||||
|
|
|
|
|
|
|
|
|
|
|
|
BeforeAfter
2.28
