OPERATION
GEOM 4
GEOM 5
GEOM 6
Top
The Top function adjusts the level (Top Key) and pincushion (Top Pin) of the top half of the display image. The four displays shown here demonstrate Top adjustments.
To stretch the upper left or right corner up
or down, select Top from the Geometry menu and press 
or 
. To adjust top pincushion, press 
or 
until the top half of the image is as curved or as straight as desired.
Bottom
The Bottom function adjusts the level (Bottom Key) and pincushion (Bottom Pin) of the bottom half of the display image. The four displays shown at right demonstrate Bottom adjustments.
To stretch the lower left or right corner up or down, select Bottom from the Geometry menu and press 
or 
. To adjust bottom pincushion, press 
or 
until the bottom half of the image is as curved or as straight as desired.
Bow
The Bow function adjusts horizontal bowing (H Bow) across an image. It also adjusts vertical curvature (V Bow) in the middle
of the picture. The four displays at right demonstrate H Bow and V Bow adjustments.
To adjust H bow, select Bow from the Geometry menu then press 
or 
until
the image appears as desired. To adjust V Bow, press 
or 
until the center of the picture is as curved or as straight as desired.
3.25
