Madrigal Imaging MP-8, MP-9 manual Random Access

OPERATION

Random Access ➤	Press 3 from the Convergence menu to
Convergence	select Random Access Convergence. A red
	and green crosshatch is displayed with a
	rectangular box at the center zone. Above
	the box, “CONV” indicates that the zone
	is ready for convergence. Use the arrow
	keys to move the red onto the green within
	the box. This affects the position of the red
	with respect to the green over the entire
	screen (static convergence).

CONV

To change the convergence	SEQUENCE		REFERENCE	CONVERGENCE
color, press COLOR . Each		Press:	COLOR	COLOR
press of the Color key	1.	COLOR	green	blue
changes the color as shown.	2.	COLOR again	red	blue
	3.	COLOR again	a white crosshatch for reference
To move to another control	4.	COLOR again	repeat starting at green-red
point, press ENTER . The
caption above the box changes to “MOVE.”
Use the arrow keys to move to another
zone for convergence. Press	ENTER to
converge the zone. When all zones
requiring adjustment are converged, press				CONV
EXIT to display the Exit dialog box. Press
ENTER to save the new convergence settings.
To go back to the convergence screen,
move the cursor bar to “Continue Adjust”,
then press ENTER . To discard your changes,
select “No Save.”

Note: CONV may be used instead of ENTER to alternate between converge and move functions, if preferred.

3.30