Madrigal Imaging MP-8, MP-9 manual Mounting, Floor Mount, Ceiling Mount

INSTALLATION & SETUP

2.4 Mounting

Front Screen ➤

Installations

The projector should be mounted after the system design has been established and reverse scan setup (if required) is complete.

Floor Mount

Mount the projector on a secured table or cart. Position the projector at the chosen room location with the projector pointing towards the center of the projection screen. The angle of projection, combined with the tilt angle of the screen should direct the reflected image towards the center of the audi- ence. It is recommended that the difference between the projection angle and the screen tilt angle (within a common reference) be less than 15°. Refer to Figure 2-9.

Figure 2-9.Floor Mount Installation

You can adjust projection angle and level by adjusting the height of the projector legs. See Figure 2-10.

Figure 2-10.Leg Adjustment

Ceiling Mount

Mounting the projector to the ceiling requires the use of a projector ceiling mount fixture. The fixture is shipped from the factory in kit form (with assembly instructions) for assembly and installation by the dealer/installer. For more information, contact your dealer or Madrigal.

2.12