Madrigal Imaging MP-8, MP-9 manual Center horizontal line is perpendicular to the vertical

INSTALLATION & SETUP

Step 4 ➤	Press or to adjust skew until the vertical line through the center of the
	image is not tilted (perpendicular to the horizontal line). Press or until
	the center horizontal line is perpendicular to the vertical.

Step 5 ➤	Press or to adjust keystone until the width at the top of the picture is
	equal to the width at the bottom.

	Before	After
Step 6 ➤	Press or to adjust side pincushion until the left and right sides of the
	picture are straight and not curved.

	Before	After
Step 7 ➤	Press or to adjust vertical bow until the horizontal line at the middle
	of the picture is straight. Press or	to adjust horizontal bow so that the
	vertical line at the middle of the picture is straight.

Step 8 ➤	Press or to adjust top pincushion until the horizontal line at the top of
	the picture is straight and not curved. Press or to adjust top keystone so
	that the top edge is level.

Step 9 ➤	Press or to adjust bottom pincushion until the horizontal line at the
	bottom of the picture is straight and not curved. Press or to adjust
	bottom keystone so that the bottom edge is level.

2.27