2.5Power Connection
To apply power to the projector, plug the AC line cord into the line input socket located at the front panel of the projector. Plug the three prong end of the line cord in a grounded AC outlet. Input voltage to the pro- jector must be between 90 and 264 VAC, 50 or 60 Hz. The power source must supply 650 watts of power to the projector.
90 - 264 VAC
50 - 60 Hz
Figure 2-15.Power Connection
2.6Source Connections
The projector includes a built-in RGB input interface for connection of external RGB sources and audio equipment. This input interface is shown in Figure 2-16. The built-in interface is not removable.
to projector's RS-232 in port
Figure 2-16.Projector Input Slots
Optional interface modules are available to accommodate other signal types. These include a Composite/S-Video Module, an HDTV Input Module, and a PC Analog Input Module. Any one of these can be installed in slot 2. A Multi-Standard Decoder may be installed to add four additional inputs to the system (“slots” 3 to 6). To further increase the number of inputs, a signal switcher may be connected to the RGB interface in slot 1 to add 8 more sources to the system (9 switcher inputs replace one RGB input). Other switchers may be connected to the first switcher for more inputs. Brief descriptions of the above mentioned optional modules are given in Appendix H, Interfaces. For additional details, contact your dealer or Madrigal.
control ports
