OPERATION
There are two types of setup memories: Input and Recall. Both memory types store the same parameters. The only difference is that Input memories store display settings for a particular physical input (e.g., switcher 0, slot 1) while Recall memories can be used with any input.
At any one time, one setup memory is the current setup memory. The display settings in the current setup memory are used for the current display. When a source is selected by entering its input number, the Input memory for the selected input becomes the current setup memory (unless ASR is on and is triggered). If a Recall memory is selected, it becomes the current setup memory. Display adjustments are automatically saved in the setup memory which is current at the time of adjustment (unless the setup memory is locked – explained later).
Input Memories ➤ As mentioned above, Input memories store display settings for each physical input (i.e., switcher 0, slot 1). When an input becomes the current setup memory, its display settings are used (unless ASR is on and is triggered). If the input is being selected for the first time, a new Input memory is created.
Recall Memories ➤ Recall memories provide an alternative to using the display settings stored in the Input memory of the selected source. For example, you may want to temporarily disconnect a computer connected to the projector’s RGB input and in its place, connect another computer with different signal characteris- tics. Since the connection is only temporary you don’t want to change the display settings stored in the Input memory. Instead, you can select a Recall memory which has the settings you want for the new input.
If there are many devices which will be sharing the same input, many Recall memories can be created to store the display settings for each. On the other hand, if there are many sources on different inputs with exactly the same signal characteristics, it may be possible for them to share the same Recall memory.
Recall memories are identified by a two digit number. Any number from 01 to 99 can be assigned, although only 75 memory spaces exist.
3.15
