OPERATION
Manual Learn Screen
box fits inside screen border.
<ENTER> to select bars to move
<CONV> to do Learn Screen
Current Bars: Top/Left
Move bars tountilmoveoutsidebars edge of
Manual Learn Screen
box fits inside screen border.
<ENTER> to select bars to move
<CONV> to do Learn Screen
Current Bars: Top/Left
For each bar position being adjusted, watch the bar width as it moves closer to the screen edge. If the bar starts to overlap the screen border and reduce in width, move it back one increment so that it is displayed in its entirety. If the bar is as far as it will go and it is displayed in its entirety, leave it at that position. If you notice a geometry distortion during Learn Screen, such as keystone or pincushion, use GEOM to correct it.
When all bars have been adjusted, press CONV to continue with the Learn Screen operation. The remainder of the Learn Screen process is handled automatically by ACON. Wait until it is complete, at which time the ACON
If an error occurs during either of the Learn Screen functions, processing halts and an error message is displayed. Refer to section 4.3, Troubleshooting, for assistance. Also, if during a Learn Screen you want to interrupt ACON, press EXIT . Shortly thereafter an Exit dialog box will be displayed. Follow the screen instructions to exit or continue.
3.7Utility Features The projector’s utility features allow you to customize operation of the projector to suit your application and preferences. To access these features, press UTIL . The Utilities menu is displayed.
Item 1, Source Setup, provides utilities for setup memory manipulation and selection of internal sources.
Item 2, Channel List, allows you to program the Channel List.
Item 3, Recall Memories, displays a listing of the Recall memories stored in the projector.
Item 4, Input Memories, displays a listing of the Input memories stored in the projector.
3.34
