Madrigal Imaging MP-8, MP-9 manual Convergence registration, Guided

OPERATION

The following options are available while performing any of the manual convergence routines:

Convergence on Image

When a convergence method is first selected, an internally generated crosshatch test pattern is displayed. Alternatively, you may override the use of the test pattern and have the external image displayed. Press # to cycle to the external image.

Convergence Reset

During convergence, the following reset options are available:

•Press 0 to reset red and blue convergence – static and dynamic.

•Press 1 to reset red and blue convergence – static only.

•Press 2 to reset red and blue convergence – dynamic only.

		“Static” refers to the complete image. “Dynamic” refers to a zonal area.
	Note: Allow the projector to warm up for at least forty five minutes prior to
	convergence registration.
Guided ➤	Press 1 from the Convergence menu to select Guided Convergence. An
Convergence	internally generated crosshatch is displayed for the alignment. Initially, a red
	and green crosshatch is displayed and a rectangular box surrounds the center
	convergence zone. Use , , , and to move the red onto the green in
	the zone. Press ENTER to similarly move the blue onto the green. These first
	two adjustments adjust the position of the red and blue images with respect
	to the green over the entire screen (static adjustments). The adjustments to
	follow (dynamic), modify color positioning within individual zones.

Press ENTER to move the rectangular box to the next convergence zone. Again, use the arrow keys to adjust the red on the green. Press ENTER to adjust the blue on the green.

3.28