Madrigal Imaging MP-8, MP-9 manual Step

INSTALLATION & SETUP

Step 7 ➤ Look directly into the green lens. Press , , or to center the

displayed crosshatch on the face of the picture tube.

Step 8 ➤ Look directly into the blue lens. Press , , or to center the displayed crosshatch on the face of the picture tube.

Step 9 ➤	Press to increase contrast to a normal viewing level.
Step 10 ➤	Pivot the projector and
	move it side to side as
	necessary to display a	pivot
	symmetrical crosshatch	point
	centered left-to-right on	Before	After
	the screen. The pivot
	point should be at the
	rear wing nut of the green lens to avoid changing the throw distance.
Step 11 ➤	Tilt the projector until	B G R
	the center horizontal line
	is level and centered with	Before	After
	the screen. Adjust the feet

of the projector or ceiling mount as required.

Step 12 ➤ A red image is displayed. Loosen the rear wing nut on the red lens. Rotate the lens using the wing nut until the picture is focused in the center. Tighten the rear wing nut.

B G R

Step 13 ➤ Loosen the front wing nut on the red lens. Rotate the front lens barrel until the picture is focused in the corners. Tighten the front wing nut.

B G R

Step 14 ➤	A blue image is displayed. Loosen the rear wing nut on
	the blue lens. Rotate the lens using the wing nut until the
	picture is focused in the center. Tighten the rear wing nut.

B G R

Step 15 ➤	Loosen the front wing nut on the blue lens. Rotate the
	front lens barrel until the picture is focused in the corners.
	Tighten the front wing nut.	G	R
	B

2.21