
OPERATION
  | The Name Field | 
  | The Name field stores the names of the sources in the list. Source names  | 
  | may be up to 11 characters in length. It is recommended that source names  | 
  | be entered to make it easier to keep track of the sources. Source names are  | 
  | briefly displayed when channels are selected.  | 
  | Notes: 1) Digits may be entered using the number keys on the keypad or selected  | 
  | using the and keys. 2) If is pressed during name editing, all characters in  | 
  | the field to the right of the cursor will be cleared.  | 
  | The Input Field | 
  | The Input field contains the switcher and slot number of the input to be  | 
  | switched to when the channel is selected. If the input is a direct projector  | 
  | input, the input number is a 0 followed by the projector slot number. If  | 
  | the input is from a switcher, the input number is a number from 1 to 9  | 
  | (switcher number) followed by the switcher slot number.  | 
  | The Recall Memory Field | 
  | The Recall Memory field contains the number of the Recall memory to be  | 
  | used when the channel is selected. If the field does not contain a number  | 
  | (a blank or dash is shown), no Recall memory will be used.  | 
  | The Up/Down Field (U/D) | 
  | The Up/Down field specifies the channels which are accessible when using  | 
  | up/down channel selection (explained in section 3.3). If the field does not  | 
  | contain a check mark, the channel is ignored. To enter a check mark, press a  | 
  | number key   | 
  | Note: Channels should contain valid inputs. For example, do not specify  | 
  | switcher 1 if switcher 1 does not exist in the system.  | 
Recall Memories ➤ | The Recall Memories utility provides a list of the Recall memories stored in  | 
(Listing) | the projector. (Recall memories are explained in section 3.4). The list  | 
  | includes the scan frequencies of each Recall memory. A check mark ( ) is  | 
  | displayed in the ASR column next to the memories which ASR may use. If  | 
  | two or more Recall memories have identical scan frequencies, only the  | 
  | memory last adjusted will have a check mark.  | 
3.41