MAINTENANCE

Power Cord and

Only use attachments or accessories recommended by Madrigal imaging.

Attachments

 

Use of others may result in the risk of fire, shock or personal injury.

 

 

Do not allow anything to rest on the power cord. Locate the projector where

 

 

the cord cannot be abused by persons walking on it or objects rolling over it.

 

 

Operate the projector at the voltage indicated on the line voltage indicator.

 

 

Do not overload power outlets and extension cords as this can result in fire

 

 

or shock hazards.

 

 

The projector is equipped with a three wire plug having a third (grounding)

 

 

pin. This is a safety feature. If you are unable to insert the plug into the

 

 

outlet, contact an electrician to have the outlet replaced. Do not defeat the

 

 

safety purpose of the grounding-type plug.

Ventilation Slots

Slots and openings in the projector provide ventilation. To ensure reliable

 

 

operation of the projector and to prevent overheating, these openings must

 

 

never be blocked or covered. The projector should never be placed near or

 

 

over a radiator or heat register. The projector should not be placed in an

 

 

enclosure unless proper ventilation is provided.

 

 

Do not push objects of any kind into the projector through the ventilation

 

 

openings. They may touch dangerous voltages or short-out parts resulting in

 

 

a fire or shock hazard. Do not spill liquids of any kind into the projector.

 

 

Should an accidental spill occur, immediately unplug the projector and have

 

 

it serviced by a qualified service technician.

Servicing

If any of the following conditions exist, unplug the projector from the

 

 

power outlet and refer service to qualified service personnel.

The power cord has been damaged.

Liquid has been spilled into the projector.

The projector has been exposed to excessive moisture. The projector does not operate normally.

The projector has been dropped or the case has been damaged. Projector performance has deteriorated.

Do not attempt to service the projector yourself. All servicing must be performed by a qualified Madrigal Imaging service technician. If replace- ment parts are required, it is important that only Madrigal Imaging approved parts are used. Other parts may result in fire, electric shock or risk of personal injury.

WARNING: THE PROJECTOR IS INTERNALLY SHIELDED TO

PROTECT THE USER FROM EXPOSURE TO SOFT X-RAY

RADIATION. IMPROPER SERVICING OR SHIELD

REMOVAL MAY RESULT IN PERSONAL INJURY.

4.2

Page 96
Image 96
Madrigal Imaging MP-8, MP-9 manual Power Cord, Attachments, Ventilation Slots, Servicing