OPERATION
interpolating between “the two closest” setup memories. This feature is very useful when adding a new source to the system and/or when much adjust- ment is required. By using the “ASI with Save” feature, the projector can do most of the required adjustments for you.
To perform an “ASI with Save”, press 2 from the Source Setup menu. A dialog box is displayed. Press 
to move the cursor bar to “Do It” then press ENTER . New display settings will immediately be calculated and saved in the current setup memory. The only exception is when the current setup
memory is locked. If locked, display settings will not be modified. If “Cancel” is selected from the dialog box, the operation is stopped. For more information about the ASI logic process, refer to Appendix C, ASR/ASI Logic Diagrams.
Notes about the ASI feature ...
ASI works better when there are many setup memories in the system. For example, if you always use the same input and you never use Recall memories (thus only one setup memory has ever been created), ASI will not be effective. However, if many Input and Recall memories have been used and adjusted for a variety of sources, the projector has more “knowl- edge” in its database for performing an ASI. As this “knowledge” increases, ASI accuracy improves.
UTIL 1 | 3 | Current Setup (Locked/Unlocked) |
This utility allows you to lock or unlock the current setup memory. Locking a setup memory prevents changes to display settings from being saved in that memory. For example, if a locked Recall memory is selected and then brightness is adjusted, the new brightness setting is only temporary. If the Recall memory is reselected, the original brightness setting will be restored.
Note: When a locked setup memory is selected, a key icon ( 
) is displayed in the Source Message.
To lock or unlock the current setup memory, press 3 from the Source Setup menu. Item 3 in the menu indicates the current setting.
UTIL 1 | 4 | ASR (On/Off) |
The ASR (Automatic Source Recall) feature provides automatic Recall memory selection or ASI (Automatic Source Interpolation) for inputs which have ASR set to On.
To turn ASR on or off for the current input, press 4 from the Source Setup menu. Item 4 in the menu indicates the current setting.
3.36
