Madrigal Imaging MP-8, MP-9 manual Hardware, Setup, Keypad, Conversion

INSTALLATION & SETUP

SQUARE ROOMS	RECTANGULAR ROOMS
Corner placement of screen	Screen placement along short
yields best audience coverage.	wall yields best audience coverage.

Prime Audience

Area

Prime Audience

Area

Figure 2-5.Screen Locations for Maximum Audience Coverage

2.3 Hardware	This section explains: how to convert the keypad from a built-in keypad to
Setup	a remote keypad, how to change keypad protocol and backlit settings, and
	how to determine if reverse scan setup is required.
Keypad ➤	The projector includes a multi-use full-function keypad which may be
Conversion	configured for use as a built-in, IR remote, or wired remote keypad. The
	keypad is configured at the factory for built-in use. It is located below the
	front top cover. You can use the keypad as it is or re-configure it for
	remote operation. You can also “hard wire” the keypad to be a protocol A
	or protocol B keypad (see section 3.7, Utility Features for information
	about keypad protocols).

2.8