Madrigal Imaging MP-8, MP-9 manual Source Selection, Input

OPERATION

Page 3 lists the display settings currently in use. Note: If the current setup memory is locked or an ASI has occurred, the display settings shown may not be identical to those stored in the setup memory.

3.3Source Selection

Notes: To view help pages pertaining to the status pages and their contents, press HELP during status page display.

“Time” does not update on-screen.

The projector includes a built-in RGB input interface to accept a single input. With optional accessories such as a Multi-standard Decoder, and the use of one or more external switchers, the number of inputs can be significantly increased. Because of this large capability, three source selection methods are available: Input Selection, Direct Channel Selection, and Up/Down Channel Selection. Sources are selected at operation level.

	Notes: 1) For systems with only one or two source connections, direct input selec-
	tion may be the only method you will use. If your system includes many sources,
	all methods will be of interest. 2) Internal sources are also selectable for use dur-
	ing setup and testing. To select an internal source, refer to section 2.10, Memory
	Setup, and section 3.7, Utility Features.
Input ➤	This method is the most basic of the three source selection methods. A
Selection	source is selected by specifying the input to which the source is connected,
	defined by a switcher number and slot number. For the purposes of input
	selection, the projector is considered to be a type of switcher. Projector and
	switcher slots are illustrated in Figures 3-4 and 3-5 on the next page. Each
	slot can accept one external input signal for display.

3.10