Glass Cleaning

It is necessary to periodically clean glass. During start- up, condensation, which is normal, forms on the inside of the glass. This condensation causes lint, dust and other airborne particles to cling to glass surface.

Also initial paint curing may deposit a slight film on the glass. It is therefore recommended glass be cleaned two or three times with a non-ammonia based house- hold cleaner and warm water. The use of fireplace glass cleaner is recommended within the first few weeks of operation.

After the initial cleaning process the glass should be cleaned two or three times during each operating sea- son depending on the environment in the house.

Clean the glass after the first two weeks of operation.

Do not clean the glass when hot.

Do not use an abrasive cleaner.

Do not strike or slam the glass.

Ceramic Refractory Installation

The vertical refractory panels are installed in the unit prior to shipment. For assembly procedures, refer to Figure 39.

1.Unpack the ceramic refractory panels from the car- ton.

Handle the refractory material carefully, the panels are fragile.

2.Place the two end floor refractory panels on the base of the fireplace.

3.Place both side panels along the side of the base.

NOTE: 360DVS2 is the only 360DV unit that is fitted with two (2) end vertical panels, as shown in Figure

39.360DVSL and 360DVSR units are each fitted with one end vertical panel and two side vertical panel. The 360DVS3 has only one end vertical panel.

Vertical Panels in

Place When Shipped

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Floor Panels Placed

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FP1446

During Installation

Fig. 39 Ceramic panel installation.

360DVS Series Direct Vent Fireplaces

Log Installation

Refer to Figures 40 and 41 for log location and align- ment.

Because of the log stack design, these instructions can be followed from either side of the fireplace. To follow these instructions, identify the logs by the number cast into the underside.

For correct operation of the fireplace, the logs must be correctly placed in the sequence described below:

1.Unpack the logs from the shipping carton. The logs are fragile; handle them carefully.

Handle and dispose of plastic bags in which logs were shipped in a safe manner. As with all plastics, they are not toys and should be kept away from infants.

2.Remove both sides of the window frame assembly (where applicable).

3.Place the log rear (B120) on the grate. The square hole located on the underside of the log is to be placed over the center of the grate. The inner end of the log ensures that the bottom hole is located on the pin of the support.

4.Place the log front left (B121) on the grate. The square hole located on the underside of the log is to place over the corner leg of the grate. The inner end of the log ensures the bottom holes are located on the pin of the support.

5.Place the log front right (B122). Once more, the square hole fits over the corner leg of the grate. The inner end of this log maintains a recess on the underside, which locates over the knob on the top of the log front left (B121) to secure the inner end in place.

6.Place the log rear left (B123). The bottom back of the log rests on the grate. The notch at the back of the log locates over the knob on the top of the log rear (B120). The bottom of the log rests on top of the log front left (B121).

7.Place the log bottom left (B124). The log maintains a step on the outer end, which rests against the prong of the grate. The alternate end rests on the side floor refractory panel.

8.Place the log rear right (B125). The log maintains a hole on the underside, which rests over the knob on the top of the log rear (B120). The bottom of the log rests against the side floor refractory panel, and the side rests against the last prong of the grate.

9.Place the log center (B126). The log maintains a hole on the underside, which rests over the knob on the top of the log front right (B122). The alternate end rests against the side floor refractory panel and positions between the two (2) prongs of the grate.

10006326

25

Page 24 Page 26
Page 25
Image 25
Majestic Appliances 360DVSL, 360DVSR, 360DVS3, 360DVS2 Glass Cleaning, Ceramic Refractory Installation, Log Installation
Page 24 Page 26

360DVS3, 360DVS2, 360DVSR, 360DVSL specifications

Majestic Appliances has been a leader in the home appliance industry, and their latest creations, the 360DVSL, 360DVS2, 360DVS3, and 360DVSR, exhibit the company's commitment to innovation, quality, and user convenience. These models are built with cutting-edge technology and unique features designed to enhance the cooking experience.

The Majestic 360DVSL is known for its sleek design and advanced cooking capabilities. One of its standout features is the dual-fuel capability, which combines the benefits of both gas and electric cooking. This allows for precise temperature control while retaining the intense heat that gas provides. The 360DVSL also features a large oven capacity, making it particularly useful for families and those who love to entertain. The self-cleaning function simplifies maintenance, allowing users to spend more time cooking and less time cleaning.

The 360DVS2 model takes efficiency to the next level with its smart technology integration. It comes equipped with Wi-Fi connectivity, enabling users to control the oven remotely via a smartphone app. This feature not only allows for pre-heating but also for monitoring cooking progress from anywhere in the house. Additionally, the 360DVS2 includes a convection oven that distributes heat evenly, ensuring perfect baking every time.

Meanwhile, the 360DVS3 model caters to culinary enthusiasts with its professional-grade features, including high BTU burners that can achieve rapid boiling and simmering. This model’s heavy-duty construction means it can withstand heavy use, making it ideal for serious cooks. The integrated griddle and customizable burner configurations provide maximum flexibility for diverse cooking needs.

Lastly, the 360DVSR is designed with safety and usability in mind. It features a child lock function and advanced flame failure safety systems, providing peace of mind for households with children. Moreover, the ergonomic knobs and touch controls enhance usability, allowing precise adjustments even when hands are busy.

Overall, the Majestic Appliances range of 360DVSL, 360DVS2, 360DVS3, and 360DVSR offers a comprehensive selection tailored to meet a variety of cooking needs. Each model is imbued with the spirit of innovation, quality craftsmanship, and attention to detail that Majestic is known for, making them excellent choices for anyone looking to upgrade their kitchen appliances.
Top Page Image Contents