P 23/ 27

Wiring diagram

Fig. D-2E

RP1800F with LED Job Light

Wiring in Motor housing on Grip R side (Switch side)

Lead Wire Holder

When putting Lead wires for connecting

to Terminal block, into this Lead wire holder, thin Lead wire (purple) of Power supply circuit has to be put under the following Lead wires.

*Thick Lead wire (red) of Power supply circuit

*Thick Connecting lead wire (purple) for connecting Switch to Terminal block

Terminal block

The extra portion of Controller’s thin Lead wires (black, red) to be connected to LED has to be put in this position.

Connector of Controller’s lead wires has to be connected to LED circuit, facing Lead wire (Red) to Red marking side.

And put the Lead wires into Lead wire holder.

Lead wire holder

Grip R

Connecting lead wires

Switch lever

 

(orange purple) to be

 

connected to Switch in

Connector

Grip R

of Controller

 

 

Red marking

Controller’s Lead wire (red)

Page 23
Image 23
Makita RP2300FC, RP2301FC dimensions Fig. D-2E