P 9/ 27
Repair
[3] DISASSEMBLY/ASSEMBLY
[3]-2. Armature, Motor bracket complete (cont.)
ASSEMBLING
(5)Assemble Grip L to Motor bracket on Lock lever side and secure it with M6x25 Pan head screw. Refer to Fig. 15. Assemble Grip cover L to Grip L by screwing two 4x12 Tapping screws. Refer to Fig. 15.
(6)Assemble Armature to Motor bracket. Refer to Fig. 13
(7)Assemble Retainer to Armature shaft by turning with Wrench 41 or Hex socket
(8)Assemble Motor bracket to Motor housing. Refer to Fig. 11.
(8)In case of Models RP1800F, RP1801F, RP2300F, RP2301FC, connect LED circuit. Refer to Fig. 10.
(9)Assemble Grip R section to Motor bracket. Refer to Fig. 9.
(10)Secure Grip cover (R) with two 4x18 Tapping screws to the Grip R. Refer to right illustration in Fig. 8. And assemble Cover to Motor housing. Refer to left illustration in Fig. 8.
(11)Mount Retainer cover to Motor bracket. Refer to right illustration in Fig. 7. And assemble Carbon brushes and Collet nut. Refer to left illustration in Fig. 7.
[3]-3. Shaft Lock
DISASSEMBLING
(1)Separate Base section from Motor section as illustrated in Figs. 2, 3.
(2)Remove Retainer cover by unscrewing two M4x18 Pan head screws as the right illustration in Fig. 7.
(3)Shaft lock mechanism can be disassembled as illustrated in Fig. 19.
Fig. 19
| Collared pin 6 and Compression spring 8 | |
| are removed from Push button. | |
1R268 | Push button | Push button |
| ||
|
| |
| Splinter of | Compression spring 8 |
| Push button | |
| Collared pin 6 | |
Retainer |
|
cover
Applying 1R268 to the pin hole of Push button, strike Collared pin 6 through the pin hole of Push button.
Collared pin 6 can be removed from Push button.
Retainer cover
Note: The removed Push button has to be replaced with new Push button.
ASSEMBLING
Shaft lock section can be assembled as illustrated in Fig. 20.
Fig. 20
Splinter of | Push Button |
| |
Push button | Compression spring 8 |
| |
| Collared pin 6 |
Collared pin 6 |
|
Retainer
Remove Splinter of Push buttoncover
from Collared pin 6.
Set the parts to Retainer cover as illustrated above.
Push button
Collared pin 6
1R030
Supporting Collared pin 6 with 1R030, assemble Push button by pressing with Arbor press.
Note: Use new Push button.