Section 3 | Ice Machine Operation |
|
|
REMOVAL OF PARTS FOR CLEANING/SANITIZING
!Warning
Disconnect electric power to the ice machine at the electric switch box before proceeding.
!Warning
Wear rubber gloves and safety goggles (and/or face shield) when handling Ice Machine Cleaner or Sanitizer.
!Caution
Do not mix Cleaner and Sanitizer solutions together. It is a violation of Federal law to use these solutions in a manner inconsistent with their labeling.
1.Turn off the water supply to the ice machine at the water service valve or disconnect water supply line at float valve quick disconnect by depressing stainless steel lever and pulling the fitting off.
2.Remove the components listed on the following pages for cleaning and sanitizing.
3. | Soak the removed part(s) in a properly mixed | ||
| solution of cleaner and water. | ||
|
|
| |
Solution Type | Water | Mixed With | |
| Cleaner | 1 gal. (4 l) | 16 oz (500 ml) cleaner |
|
|
| Part Number 000000084 |
4. | Use a | ||
| brush) to carefully clean the parts. | ||
5. | Use the solution and a brush or sponge to clean all | ||
| disassembled components and the inside of the bin. | ||
6. | Rinse all cleaned parts with clear water. | ||
7. | Mix a solution of sanitizer and water. | ||
|
|
| |
Solution Type | Water | Mixed With | |
| Sanitizer | 3 gal. (11.4 l) | 2 oz (60 ml) sanitizer |
|
|
| Part Number |
8. | Soak the parts in the sanitizer /water solution for 10 | ||
| minutes. Use the sanitizer/water solution and a | ||
| sponge to sanitize all removed components and the | ||
| inside of the bin. Do not rinse the sanitized parts. | ||
9. | Install the removed parts in the ice machine. | ||
10. | Turn on the water and electrical supply. | ||
Part Number 000002688 |
