| Speakers |
|
|
Setting items | Setting details |
|
|
Bass | Subwoofer Mode : Select low range signals to be reproduced by |
Set subwoofer and LFE | subwoofer. |
signal range playback. | • LFE : The low range signal of the channel set to “Small” speaker size is |
| added to the LFE signal output from the subwoofer. |
| • LFE+Main : The low range signal of all channels is added to the LFE |
| signal output from the subwoofer. This is usually the best setting for |
| most systems. |
| • “Subwoofer Mode” can be set when “Speaker Config.” – “Subwoofer” |
| (vpage 107) is set to other than “No”. |
| • Play music or a movie source and select the mode offering the strongest |
| bass. |
| • Select “LFE+Main” if you want the bass signals to always be produced |
| from the subwoofer. |
| NOTE |
| If “Front” and “Center” for “Speaker Config.” are set to “Large”, and |
| “Subwoofer Mode” is set to “LFE”, no sound may be output from the |
| subwoofers, depending on the input signal or selected sound mode. |
LPF for LFE : Set LFE signal playback range. Set this when you want to change the playback frequency (low pass filter point) of the subwoofer.
•80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz / 250Hz
Information instructions Advanced instructions Basic
DVD
109