Change the display name of the selected input source.
This is convenient when the input source name of your device and the input source name of this unit are different. You can change the name to suit your needs. When the renaming is completed, the name is displayed on this unit’s display and on the menu screen.
Setting details
CBL/SAT /
•Up to 12 characters can be input.
•For character input, see page 92.
Set Defaults : The “Source Rename” settings are returned to the default settings.
• Reset : Reset to the defaults.
• Cancel : Do not reset to the defaults.
If you select “Set Defaults” and press ENTER, the message “Reset all source names to the factory defaults?” is displayed. Select “Reset” or “Cancel”, and then press ENTER.
| Hide Sources | Default settings are underlined. |
Remove from the display input sources that are not used.
Setting details
CBL/SAT /
| Inputs |
| Source Level | Default settings are underlined. |
|
|
•This function corrects the playback level of the selected input source’s audio input.
•Make this setting if there are differences in the input volume levels between the different sources.
Setting details
Input SelectDefault settings are underlined.
Set the audio input mode and decode mode of each input source.
The input modes available for selection may vary depending on the input source.
Setting items |
| Setting details |
| |
|
| |||
Input Mode | Auto : Automatically detect input signal and perform playback. | |||
Set the audio input modes | HDMI : Play only signals from HDMI input. |
| ||
for the different input | Digital : Play only signals from digital input. |
| ||
sources. | Analog : Play only signals from analog input. |
| ||
It is normally recommended |
|
|
| |
to set the audio input mode | • “Digital” can be set for input sources for which “DIGITAL” is assigned | |||
to “Auto”. | ||||
at “Input Assign” (vpage 104). |
| |||
|
| |||
| • When digital signals | are properly input, the | indicator lights on | |
| the display. If the | indicator does not light, check “Input Assign” | ||
| (vpage 104) and the connections. |
| ||
| • If “HDMI Control” is set to “On” and a TV compatible with the ARC is | |||
| connected via the HDMI MONITOR connectors, the input mode whose | |||
| input source is “TV AUDIO” is fixed to ARC. |
| ||
instructions Advanced instructions Basic
Information
input source that is not used.
•Show : Use this source.
•Hide : Do not use this source.
NOTE
Input sources set to “Hide” cannot be selected using the input source select button.
Decode Mode
Set the audio decode mode for input source.
CBL/SAT 
GAME AUX
MEDIA PLAYER |
| CD | |
|
|
|
|
TV AUDIO |
|
|
|
Auto : Detect type of digital input signal and decode and play automatically.
PCM : Decode and play only PCM input signals.
DTS : Decode and play only DTS input signals.
•This item can be set for input sources for which “DIGITAL” is assigned at “Input Assign” (vpage 104).
•Normally set this mode to “Auto”. Set “PCM” and “DTS” when inputting the corresponding input signal.
105
DVD