Marantz SR5007 Subwoofer Level, Tone, Dialogue Level

Setting items	Setting details
Center Width	0 – 7 (3)
Distributes the dialogue	The smaller the value, the more dialogue is concentrated on the center
output from the center
	channel. The larger the value, the more dialogue is distributed to front
channel to left and right
	left and right channels, and the more the sound image widens in the
channels and widens the
	front.
sound image in the front.
You can set this when the
sound mode is Dolby PLgx
in the “Music” mode.
Height Gain	Low : Reduce the front height channel volume.
Control the front height	Normal : Front height channel sound is output with standard sound
channel volume.	volume.
	High : Increase the front height channel volume.

NOTE

	“Height Gain” is displayed for the following settings.
	• When “Assign Mode” (vpage 121) is set to “Front Height”.
	• When the “Speaker Config.” – “Front Height” setting (vpage 122) is
	set other than to “None”.
	• When sound mode is “PLgz” or the PLgz decoder is used.
Set Defaults	Yes : Reset to the defaults.
The “Surround Parameter”	No : Do not reset to the defaults.
settings are returned to the

default settings.	When you select “Set Defaults” and press
	ENTER, the “Reset to the default values?”
	prompt is displayed. Select either “Yes” or
	“No”, and press ENTER.

	Audio
Dialogue Level	Default settings are underlined.

Sets the output level to clarify the dialogue output from the center channel.

Setting items	Setting details
Dialogue	–12dB – +12dB (0dB)
Subwoofer Level	Default settings are underlined.

Sets the subwoofer on/off and its output level.

Setting items	Setting details
Subwoofer	On : The subwoofer is used.
Turn subwoofer output on	Off : The subwoofer is not used.
and off.	NOTE
	This can be set when the sound mode is “DIRECT” or “PURE DIRECT”
	(vpage 71) and the “Subwoofer Mode” (vpage 122) is
	“LFE+Main”.
Subwoofer Level	–12dB – +12dB (0dB)
Set the subwoofer output
level.

version Basic

version Advanced

Information

Tone Default settings are underlined.

Adjust the tonal quality of the sound.

Setting items	Setting details
Tone Control	On : Allow tone adjustment (bass, treble).

Set the tone control function Off : Playback without tone adjustment.
to “On” and “Off”.	“Tone Control” can be set when “Dynamic EQ” (vpage 109) is set
	to “Off”.

NOTE

•“Tone Control” settings are not reflected to ZONE2.

•The tone cannot be adjusted in the “DIRECT” or “PURE DIRECT” mode.

Bass	–6dB – +6dB (0dB)
Adjust bass.	“Bass” can be set when the menu “Tone Control” setting is “On”.
Treble	–6dB – +6dB (0dB)
Adjust treble.	“Treble” can be set when the menu “Tone Control” setting is “On”.
	DVD	107