Set up speakers (Audyssey® Setup)

Measurement (2nd – 8th)

Calculation

version Basic

In this step, you will perform measurements at multiple positions (two to eight positions) other than the main listening position.

Just one position can be measured but measuring multiple positions increases the accuracy of the correction of acoustic distortion within the listening area.

10Move the setup microphone to position 2, select “Continue”, and then press ENTER.

The measurement of the second position starts. Measurements can be made in up to eight positions.

Audyssey Setup

Place the microphone at ear level at the 2nd listening position,

then select “Continue”...

Continue

Calculation

Audyssey Setup

Place the microphone at ear level at the 3rd listening position,

then select "Continue"...

Continue

Calculation

Repeat Last Test

11Repeat step 10, measuring positions 3 to 8.

When measurement of position 8 is completed, a “Measurements finished.” message is displayed.

Audyssey Setup

Measurements finished.

Calculation

Repeat Last Test

12Select “Calculation” and then press ENTER. Measuring results are analyzed, and the frequency response of each speaker in the listening room is determined.

Audyssey Setup

Calibration completed! Now calculating...Please wait.

50%

Analysis takes several minutes to complete. The more speakers and measurement positions that there are, the more time it takes to perform the analysis.

vSee overleaf

version Advanced

Information

To skip measuring the third and subsequent listening position, use ui to select “Calculation” and press ENTER to proceed to step 13.

To measure the second position again, use ui to select “Repeat Last Test” and press ENTER.

DVD

30