HDMI control function

NOTE

•When “HDMI Control” is set to “On”, it consumes more standby power.

•The HDMI control function controls operations of a TV that is compatible with the HDMI control function. Make sure that the TV and HDMI are connected when you perform HDMI control.

•Some functions may not operate depending on the connected TV or player. Check the owner’s manual of each device for details beforehand.

•When “Power Off Control” on the menu is set to “Off” (vpage 113), this unit is not set to standby even if the connected device is in the standby mode.

•When connection changes are implemented, such as adding connections to HDMI devices, linked operations may be initialized. In this case, you will need to reconfigure the settings.

•Should any of the operations below be performed, the interlocking function may be reset, in which case, repeat steps 2 and 3.

•There is a change to the connection between the devices and the HDMI, or an increase in devices.

Sleep timer function

•You can have the power automatically switched to standby once a set time has elapsed. This is convenient for viewing and listening while going to sleep.

•The sleep timer function can be set for each zone (vpage 99 “Sleep timer function”). (The MAIN ZONE setting method is explained here.)

1Press MAIN to switch the zone mode to the MAIN ZONE.

MAIN lights.

2Press SLEEP and display the time

you want to set.

“Sleep” appears on the display.

The sleep timer indicator on the display lights (vpage 136).

•The time switches as shown below each time SLEEP is pressed.

Off 10 min 20 30 40 50

120 110 100 90 80 70 60

version Basic

version Advanced

To confirm the countdown time before putting the unit to sleep

Press SLEEP.

“Sleep zmin” appears on the display. zz Countdown time

To cancel the sleep timer

Press SLEEP to set “Off”.

“Sleep zmin” appears on the display.

•The sleep timer setting is canceled if this unit’s power is set to standby.

•The sleep timer function can be set separately for the different zones (vpage 99 “Sleep timer function”).

NOTE

The sleep timer function cannot turn off the power of devices connected to this unit. To turn off the power of those connected devices, set up sleep timers on the connected devices themselves.

DVD

92

Information