Items | Setting details |
ZONE | MAIN ZONE : This item shows information about settings for MAIN |
Show information about | ZONE. The information displayed differs according to the input source. |
current settings. | • ZONE Name / Select Source / Name / Sound Mode / Input Mode / |
| Decode Mode / HDMI / Digital / Component / Video Select / Video |
| Mode / Content Type / Video Conversion / i/p Scaler / Resolution / |
| Progressive Mode / Aspect Ratio etc. |
| ZONE2 : This item shows information about settings for ZONE2. |
| • ZONE Name / Power / Select Source / Volume Level |
| “Volume Level” for ZONE2 is displayed when “Assign Mode” |
| (vpage 121) is set to “ZONE2”. |
Firmware | Version : Displays information for the current firmware. |
Press INFO to display current source name, volume, sound mode name, and other information at the bottom of the screen.
Examples of screen display• Status display screen |
|
When the input source is switched. | When the volume is adjusted. |
| AUTO DTS | VIDEO CBL/SAT |
|
|
SOURCE | DVD |
|
| 50.0 |
SOUND | DTS SURROUND |
|
| |
|
|
| ||
|
|
|
|
|
Status display: The operating status appears briefly on the screen when the input source is switched or the volume is changed.
NOTE
The status display screen cannot be displayed at a computer’s resolution (e.g. VGA) or while certain 3D video contents is being played.
| General |
| Firmware | Default settings are underlined. |
Set whether or not to check for firmware update, update the firmware, and display update and upgrade notifications.
Setting items |
|
| Setting details | ||
|
|
|
|
| |
Update | Check for Update : Check for firmware updates. You can also check | ||||
Update the firmware of the | approximately how long it will take to complete an update. | ||||
receiver. | Update Start : Execute the update process. | ||||
NOTE | When updating starts, the STANDBY indicator becomes red and the menu | ||||
screen is shut down. The amount of update time which has elapsed is | |||||
In cases where it is not | |||||
displayed. |
|
| |||
possible to connect to | When updating is complete, the STANDBY indicator becomes green and | ||||
the network after doing a | normal status is resumed. | ||||
firmware update, connect | • If updating fails, the set automatically retries, but if updating is still not | ||||
to the network again using | |||||
| possible, one of the messages shown below is displayed. If the display | ||||
“Network” (vpage 124). |
| ||||
| reads as shown below, check the settings and network environment, | ||||
|
| ||||
|
| then update again. |
|
| |
|
| Display | Description |
| |
|
| Updating fail | Updating failed. |
| |
|
| Login failed | Failure to log into server. |
| |
|
| Server is busy | Server is busy. Wait a while then try again. |
| |
|
| Connection fail | Failure in connecting to server. |
| |
|
| Download fail | Downloading of the firmware has failed. |
| |
|
|
|
|
| |
v See overleaf
version Basic
version Advanced
Information
DVD | 131 |